|
|
(+ click a material to expand upon its characteristics) |
| |
+ Nitrile butadiene (NBR, BUNA-N)
Nitrile butadiene (NBR, BUNA-N)
Better known as Nitriles, reinforced NBR rubbers have good oil and gasoline resistance, tensile strength, elongation properties, heat resistance and low compression set. Special compounding is required for good weatherability.
Visit the BUNA-N / NBR page for more information.
close details
|
+ Fluorocarbon (FKM, Viton® ETP, Viton® Extreme)
Fluorocarbon (FKM, Viton® ETP, Viton® Extreme)
FKM is a moderately priced elastomer exhibiting excellent resistance to heat, ozone, oils, many chemicals, and some solvents. Higher levels of chemical resistance or enhanced low temperature properties are achieved through the selection of the proper polymer family. DuPont's popular Viton® ETP elastomer is a member of the FKM family.
Visit the FKM page for more information.
close details
|
+ Ethylene propylene (EPR and EPDM)
Ethylene propylene (EPR and EPDM)
Ethylene propylene is a low cost polymer with high tensile strength and elongation, and excellent resistance to oxygen and ozone when properly reinforced. EPR and EPDM, two such polymers, have the potential of good flexing characteristics, low compression set, good heat resistance, and good electrical properties, in addition to high-availability and low-cost.
Visit the EPR and EPDM page for more information.
close details
|
+ Silicones
Silicones
Silicones are higher-end rubbers which include several varities of the siloxane polymer chain (also called polysiloxanes). Silicone compounds are resistant to heat, high-aniline point oils, atmospheric conditions, ozone, and compression set.
Visit the Silicones page for more information.
close details
|
|
|
+ Fluorosilicone (FVMQ)
Fluorosilicone (FVMQ)
FVMQ, also called fluorosilicone, is a high-end rubber offering outstanding aging properties over a wide temperature range.
Visit the FVMQ page for more information.
close details
|
|
|
+ Perfluoro (FFKM, Isolast®, Kalrez®, Chemraz®, Simriz®)
Perfluoroelastomer (FFKM, Isolast®, Kalrez®, Chemraz®, Simriz®)
Commonly referred to as Isolast® (Trelleborg Sealing Solutions), Kalrez® (DuPont), Chemraz® (Greene, Tweed & Co.), and Simriz® (Simrit) this expensive elastomer type is usually produced as a terpolymer of tetrafluoroethylene.
Visit the Perfluoroelastomer (FFKM) page for more information.
close details
|
|
|
|
|
+ Ethylene acrylic (AEM, Vamac®)
Ethylene acrylic (AEM, Vamac®)
AEM, also known as Vamac (DuPont), consists primarily of methyl acrylate copolymerized with ethylene and a third monomer containing carboxylic acid. Excellent ozone, weathering, sunlight and oxidation resistance result from this elastomer's saturated ethylene chain
Visit the Ethylene acrylic (AEM) page for more information.
close details
|
|
|
+ Epichlorohydrin (ECO, Hydrin®)
Epichlorohydrin (ECO, Hydrin®)
Hydrin® is available as a homopolymer (CO) and a copolymer of epichlorohydrin (ECO) containing about 40% ethylene oxide. This rubber also has low resilience characteristics and low temperature flexibility to -5°F.
Visit the Hydrin (ECO) page for more information.
close details
|
|
|
Unsure of which material to use, or don't see your choice above? Contact Us and let Lutz help you find exactly what you're looking for!
Lutz offers a large selection of materials:
Nitrile butadiene (NBR), (BUNA-N)
Fluorocarbon (FKM)
Ethylene propylene (EPR and EPDM)
Silicones
Chloroprene (CR)
Fluorosilicone (FVMQ)
Polyurethane (AU and EU)
Perfluoroelastomer (FFKM)
Polyacrylate (ACM)
Tetrafluoroethylene and propylene (FEPM)
Ethylene acrylic (AEM)
Chlorosulfonyl polyethylene (CSM)
Hydrin (ECO)
Styrene butadiene (SBR)
Nano-rubber
Electrically conductive rubber
USP Class VI o-ring
ISO 10993 biocompatible rubber products
|
|
|
lutzsales.com 2009 © Lutz Sales Company, Inc. |
Other products and company names may be the trademarks of their respective owners.
|
| LUTZ offers a large selection of materials: |
Nitrile butadiene (NBR), (BUNA-N)
Fluorocarbon (FKM)
Ethylene propylene (EPR and EPDM)
Silicones
Chloroprene (CR)
Fluorosilicone (FVMQ)
Polyurethane (AU and EU)
Perfluoroelastomer (FFKM)
Polyacrylate (ACM)
Tetrafluoroethylene and propylene (FEPM)
Ethylene acrylic (AEM)
Chlorosulfonyl polyethylene (CSM)
Hydrin (ECO)
Styrene butadiene (SBR) |
LUTZ also carries: |
Compression Packing Seals
Dynamic Seals
Expansion Joints
Gaskets and Gasketing
Hydraulic Seals and Pneumatic Seals
Mechanical Seals
Oil Seals and Grease Seals
O-rings
Solid Elastomeric Rings
Back-up Rings
Extrusion Services
Grommets
Washers
U-Cup Lip Seals
Rubber molding services (custom-molded rubber)
Exclusion Seals
Specialty seals
Die Cutting Services
Rubber tubing
Semi finished Shapes and Stock Materials
Silicone Molding services
Tubing
Water System Approved
WRAS
WRc
NSF/ANSI Standard 61, NSF
DVGW, KTW
USP Class VI o-ring
ISO 10993 biocompatable rubber products |
Call 630.539.5500 to place an order with LUTZ!
|
|
|
|
ep70a9of
| | | | | | | | | | | | | |
